”A Good design should solve problems! People of this generation always carry cell phone with them. So, what is the best case to store our smart phone? "

The smart phone is not only a phone anymore. We use it more and more frequently, and its size is getting bigger and bigger. Thus, it’s not comfortable anymore to just squeeze it in a pants pocket, and the large glass screen also need more protection. So, our goal is to provide your device a best home with great accessibility and adequate weather or shock protection. 

 

✔ Quick magnetic fastener! Get and secure your device in one second with one hand.
CELL adopts pantented magnetic fastener. The strong magnets make them easy to close and ensures a continuously high locking force.

✔ TWS Weatherproof construction technique to prevent rain from leaking in

Weatherproof stitching/construction technique, outer seam binding, and side collars around the lid make CELL be able to deal with changing weather.
NOTICE :CELL is built with waterproof fabric and weatherproof stitching/construction technique. However, they are not drybags and can not be submerged into water. 

< Weatherproof Field Test > 

✔ Anti-theft inner pocket and outer mesh pocket

CELL is not only built for placing your mobile only, but also able to store your cards, passport and cash.
Outer mesh pocket is a good fit for small stuff , such as ticket or earphone. 
Some people use CELL to carry small cameras or GPS, it's convenient for outdoor activities.

The main compartment of CELL is padded with 2mm foam. The inner space is about 10cm width and 17cm height.
It is big enough to store most models of the mobile phones, GPS and radio. 

Mesh pocket is a good place for changes of earphone or tickets.

Inner anti-theft pocket is a good space for cards, passport, or cash.

 

4 way carry modes 
  ▎1. Shoulder bag mode 
  ▎2. Carabiner mode 
  ▎3. Shoulder strap mode
  ▎4. Belt pocket mode

 ▎1. Shoulder bag mode 
It’s a compact shoulder bag allows you to carry your device and other essential stuff. The length of the shoulder strap is quick adjustable and removable.

 

 ▎2. Carabiner mode 

There is a daisy chain sewed on the Back of CELL. It’s easy use a carabiner to clip CELL onto the belt loop of your pants, belt, and the lower webbing of backpack shoulder straps. It provides quick access and clean look whether when you are walking on the street or riding on a bicycle.

▎3. Shoulder strap mode

We leverage lightweight buckles to fasten CELL on shoulder straps of your backpack. (It is compatible with webbing on shoulder straps no wider than 1 inch.) In this mode, if you apply two buckles on CELL, it provides extra stability while moving fast, especially suitable for hikers on the trail.

* The backpack in the photo is TUFF hiking daypack

< Shoulder Strap Mode Stability Field Test > 

▎4. Belt pocket mode

The daisy chain webbing on the back of CELL has a 11cm large interval designed for inserting whether pants belt or backpack hip belt to make it a quick access belt pocket.
* The HIpbelt in the photo is the belt of FLINT Modular Backpack
* It is also compatiable with other backpack hipbelts no wider than 11cm of the waist belt of pants.

** Users Sharing Section **

< Instructions for switching modes >

☝ Shoulder bag mode
Step 1  Take the female buckle sides of the shoulder strap. knot the buckles onto the two webbing loops on the back of CELL. (refer to the photo upper left)
Step 2  Clip the buckles of the shoulder straps and it is ready to use.

☝ Carabiner mode
Step 1 Hook a carabiner into the daisy chain sewed on the Back of CELL
Step 2 You could then clip your CELL onto the belt loop of your pants, belt, and the lower webbing of backpack shoulder straps. 

☝ Shoulder Strap Mode 
Step 1 Open the two light weight clips attached the back of CELL
Step 2 Put the webbing of your shoulder strap into the clips. (no wider than 1")
Step 3 Close the clip ( make sure it close tightly, not stuck by the webbing )
Step 4 Put on the backpack and then adjust CELL to the comfortable spot
NOTICE:  If your backpack has sternum strap, we suggest that you move the sternum strap in between the two clips of CELL.
NOTICE:  It is compatible with webbing on shoulder straps no wider than 1 inch.

☝ Belt pocket mode
Step 1  Insert your hipbelt into the webbing interval on the back of CELL. (about 11cm large)
Step 2  Ready to use as a hipbelt pocket.
* The daisy chain webbing on the back of CELL has a 11cm large interval designed for inserting whether pants belt or backpack hip belt to make it a quick access belt pocket.